Floating Head Exchanger for Juice/Beverage Heating

Jiema Floating Head Exchanger for Juice/Beverage Heating, also known as Floating Tubesheet Heat Exchanger , is completed by connecting h ead plates, shell, tube bundles, mounting flange and more. For one fluid , we lead it through the tubes that are connected with the head plates , with several channels available in line with different operation conditions. For the other , it will be into the shell and uniformly distributed over the outer tube but inside the shell .

Considering various technical requirements from our customers, our Split Ring Floating Head Heat Exchanger then puts a few baffles in a bid to increase turbulence of the shell side fluid and make more heat exchange happen . Except for that, the heat transfer master himself, tube bundles, ranges from brass tube, copper-finned tube to steel tube , with an attempt to realize heating and cooling of different working fluids.

⛆ Key Points to the Installation of Floating Head Exchanger

1. Hydrostatic test pressure would be 1.5 times higher than the operating pressure with the duration of 10 minutes; (Steam:+0.3MPa;Hot water:+0.4MPa)

2. Space shall be left for future removal of the tube bundles; estimated distance between the floating head and the wall/roof of the room should be no less than the total length of the equipment;

3. Relevant valves and digital instruments shall be installed at a height that is best suitable for operation and observation;

4. Vertical clearance between the highest location of upper attachment(mostly safety valve) and the floor shall meet the installation requirements and not less than 0.2m.

⛆ Structure Chart of Floating Tubesheet Heat Exchanger

⛆ Our Mission Statement

Addressing to the principle of “ Build a company under the guideline of integrity and achieve success on quality" and the ideology of “ Constant development and continuous innovation", Guangdong Jiema Energy Saving Technology Co.,Ltd strives to provide products with stable performance at a relatively low price for users.

⛆ FAQ : Split Ring Floating Head Heat Exchanger

1. Can Split Ring Floating Head Heat Exchanger parts be removed from the equipment ?

Yes, they can . Our Floating Head Heat Exchanger , can be removed from the floating head and be cleaned. T o name just a few, there is Floating Head Exchanger, Floating Tubesheet Heat Exchanger, Split Ring Floating Head Heat Exchanger and so much more.

2. Wh y there is corrosion of my Floating Head Exchanger?

Może to być płyn korozyjny przy boku rury. The fluid ' s concentration, temperature, PH value as well as velocity would largely determine the degree of the corrosion. Therefore, please pay attention to these details if trying to prevent corrosion. Contact us for more prevention details.