Induced Draught Cooling Tower for Water Condensing

With the development of industrial production and the continuous improvement of living standards for mankind,it is urgent to control water environmental pollution and rationally develop and utilize water resources.

Therefore, many customers generally adopt Jiema Induced Draught Cooling Tower for Water Condensing , also known as Cooling Tower Cools Water or Induced Draft Cross Flow Cooling Tower , as an ideal equipment for high efficiency and energy saving. The closed loop of internal water use has been implemented to improve the reuse rate, which can effectively reduce costs and expenses.At the same time, make people's desire to adjust the ambient temperature and humidity, cleanliness and noise impact into reality.

Induced Draught Cooling Tower series adopts two side air inlet and top air outlet, which enables air to be exchanged with hot water through the fillers on both sides of the tower, then the hot and humid air comes out of the tower.

⛆ Main Features of Cooling Tower Cools Water

Small space, light structure.

Save power, less waste for floating water.

Extremely low operation noise.

Good corrosion resistance.

Łatwa konserwacja.

Convenient combination(multiple combinations can meet the requirements of different

working conditions of the Induced Draft Cross Flow Cooling Tower).

Our Induced Draught Cooling Tower can be designed with multiple combined units, and air chambers of adjacent cooling towers can be separated from each other.Under the premise of normal operation of cooling tower, maintenance, cleaning and other work can be carried out. It can also stop the operation of some cooling towers when the system is under load without affecting the performance of each other, so as to achieve the purpose of energy saving.

Until now, Jiema Cooling Tower Cools Water or Induced Draft Cross Flow Cooling Tower have been widely used in different places.

⛆ FAQ of Induced Draught Cooling Tower

1.Can your Induced Draught Cooling Tower or Induced Draft Cross Flow Cooling Tower be used to cool down any of my heating liquids if I need to?

We only suggest soft water or tap water. Liquids with impurities might cause blocking. Any special requirements, please let us know and we can try to come up with a better plan.

2.Are there different types of Cooling Towers? Can you explain to me?

Pewny. Here in China, we categorize Cooling Tower by the following degrees. There is Natural Ventilation Type Cooling Towers , Mechanical Ventilation Type Cooling Towers , and Mixed Ventilation Type Cooling Towers divided based on ways of Ventilation. As per the contact between the air and water, we can also separate these towers into Wet Type Towers, Dry Type Towers and Dry-Wet Type Towers . And yet again, as different flowing direction of the air and water, further divisions are Counter Current Cooling Tower, Cross Flow Cooling Tower , and Mix Flow Cooling Tower . If not sure which type fits to your operation perfectly, contact us and send parameters so that we can work out a solution together.